9QZ-2150A Self-Propelled Silage Harvester Baler Wrapper
The 9QZ-2150A Self-Propelled Silage Harvester Baler Wrapper cuts standing maize or forage grass, chops it, cracks the kernels, forms it into round bales and seals each bale in stretch film, all in one pass and with one operator. Supplied by Jummos as a baler wrapper supplier in China, it runs on its own 128.7 kW engine, so no tractor is needed, and it turns out 45 to 60 sealed silage bales an hour, each measuring Φ55 × 52 cm.
Because harvesting, baling and wrapping all happen on the same machine, chopped forage never sits exposed while it waits for a separate wrapper. Each bale is sealed within moments of forming, which protects fermentation and feed value from the start. A 2010 mm two-drum header, a disc chopper with a choice of 10 or 20 mm cut length and a rubbing-plate kernel processor prepare the crop, and two film racks keep the wrapper supplied through the shift.
Key Benefits
- Harvest, chop, bale and wrap in one pass – One machine replaces a forage harvester, a trailer, a baler and a separate wrapper, so the whole silage chain moves through the field together
- One-person operation – A single operator in the cab runs cutting, baling and wrapping, which reduces dependence on seasonal labour during the short silage window
- Bales sealed on the spot – Film goes on as soon as each bale forms, cutting the time chopped forage is exposed to air and reducing nutrient loss before fermentation starts
- Self-propelled, no tractor required – A 128.7 kW engine at 2400 r/min powers the machine on its own, with hydraulic drive and disc brakes
- 45 to 60 bales per hour – Steady output of Φ55 × 52 cm bales that are easy to handle, stack, transport and feed out one at a time
- Kernel processor for better corn silage – A rubbing-plate kernel processor cracks maize kernels so cattle can digest the starch, which supports better corn silage bale feed quality
- Selectable 10 or 20 mm cut length – Choose a shorter chop for denser bales or a longer one to keep more effective fibre in the ration
- 2010 mm two-drum header – A straight header with two cutting drums and 12 harvesting blades feeds the crop into four feed rollers for an even flow
- Two film racks – Two sets of film racks keep the wrapper stocked, so the operator stops less often to change rolls
- Bales made where the crop grows – Baling on site removes the need to haul loose chopped forage to a bunker or silo, which lowers transport cost for remote or scattered fields
Technical Specifications
| Item | Unit | Specification |
|---|---|---|
| Product model | / | 9QZ-2150A |
| Type | / | Self-propelled |
| Overall dimensions in working state (L x W x H) | mm | 7080 x 2250 x 4820 |
| Rated engine power | kW | 128.7 |
| Rated engine speed | r/min | 2400 |
| Cutting width | mm | 2010 |
| Crop header type | / | Straight header |
| Header cutter type | / | 2 drums |
| Harvesting blades | Pcs | 12 |
| Feeding mechanism | / | Feed roller |
| Number of feed mechanisms | / | 4 |
| Stalk chopping mechanism | / | Disc type |
| Chopping blades | Pcs | 12 |
| Kernel processor type | / | Rubbing-plate type |
| Cab type | / | Standard cab |
| Transmission | / | Manual |
| Drive type | / | Hydraulic drive |
| Brake type | / | Disc |
| Steer-wheel tread | mm | 1660 |
| Steer-wheel tire size | / | 280/70R20 |
| Drive-wheel tread | mm | 1600 |
| Drive-wheel tire size | / | 340/80R20 |
| Wheelbase | mm | 2400 |
| Working speed | km/h | 2 to 6 |
| Designed cut length | mm | 10, 20 |
| Number of film racks | Sets | 2 |
| Bale dimensions | cm | Φ55 x 52 |
| Bales per hour | Bales | 45 to 60 |
Specifications are subject to refinement. Contact the Jummos sales team to confirm the current configuration, shipping weight, transport dimensions and film requirements for your application.
Applications & Use Cases
- Whole-plant corn silage – Cuts standing maize, chops and kernel-processes it, then bales and seals it in the field for high-energy corn silage
- Forage grass silage – Harvests and bales forage grass into sealed bales for winter and dry-season feeding
- Farms without a bunker or silo – Makes individually sealed silage bales instead, so no permanent storage structure is needed
- Silage sales and supply businesses – Compact Φ55 × 52 cm bales are a tradable unit that can be sold, stacked and delivered to smaller farms
- Contract silage services – One self-propelled machine and one operator can serve many farms without a tractor, trailer or separate wrapper crew
- Scattered or remote fields – Baling where the crop grows avoids hauling loose chopped forage over long distances
- Dairy and beef feeding programs – Bales open one at a time, which keeps feed-out matched to herd size and supports mixing in a TMR mixer
Operation & Setup Notes
- Harvest whole-plant maize at the normal silage stage, roughly 65 to 70 percent moisture; crop that is too wet loses juice and nutrients, and crop that is too dry is harder to pack and seal
- Choose the 10 mm cut length when you want denser bales and better packing, and the 20 mm setting when the ration needs more effective fibre
- Keep the rubbing-plate kernel processor set so maize kernels are cracked, since whole kernels pass through cattle undigested
- Load both film racks before starting work and change rolls promptly, because an interrupted wrap leaves a bale exposed to air
- Work at 2 to 6 km/h and slow down in heavy or lodged crop so the baler and wrapper keep pace with the header
- Inspect the 12 harvesting blades and 12 chopping blades regularly; dull blades raise power demand and give a ragged, uneven chop
- Handle finished bales gently and move them to a level, clean storage area soon after wrapping, since a punctured film lets air in and spoils the bale
- Grease pivot points and check hydraulic lines at the intervals given in the operator’s manual
- Allow for working dimensions of 7080 x 2250 x 4820 mm when planning gates, sheds and overhead clearance, and confirm transport dimensions and weight with the sales team before shipping
Frequently Asked Questions
What does the 9QZ-2150A do?
It cuts the standing crop with a two-drum header, chops it with a disc chopper, cracks maize kernels with a kernel processor, forms the chopped forage into round bales and wraps each bale in stretch film. All of this happens in one pass on one self-propelled machine.
Does it need a tractor?
No. The 9QZ-2150A is self-propelled, with its own 128.7 kW engine rated at 2400 r/min, a standard cab, hydraulic drive, a manual transmission and disc brakes.
How many bales does it make per hour?
Rated output is 45 to 60 bales per hour, depending on crop density, field layout and operator experience. Over an eight hour day that is roughly 360 to 480 sealed bales.
What size are the bales?
Each bale measures Φ55 × 52 cm, the same Φ550 × 520 mm size made by compact stationary balers such as the BalerPro 55. Bales of this size are easy to handle, stack, transport and feed out one at a time.
Which crops can it harvest?
It is designed for corn stalks, including whole-plant maize for silage, and for forage grass. For other crops, contact the Jummos sales team to confirm suitability before purchase.
How many people does it take to run?
One. A single operator in the cab controls cutting, chopping, baling and wrapping, which reduces labour needs during the busy silage season.
Can I choose the chop length?
Yes. The designed cut length is 10 mm or 20 mm. Shorter chop packs more densely, while longer chop keeps more effective fibre for the ration.
What film does it use, and can I buy it from Jummos?
The wrapper uses silage stretch film loaded on two film racks. Jummos and its sister brand Silopak supply silage film; contact the sales team to confirm the roll size that fits this machine before ordering.
Is OEM or customization available?
Configuration, color and OEM options for the 9QZ-2150A should be confirmed with the Jummos sales team, who can advise on what is available for your market and order volume.
OEM & Customization
Jummos supplies the 9QZ-2150A Self-Propelled Silage Harvester Baler Wrapper to farms, silage contractors and distributors worldwide. Configuration, color, branding and OEM arrangements depend on order volume and market requirements, so please confirm them with our sales team before ordering. We can also supply matching silage film through our sister brand Silopak and advise on bale storage and feed-out. To discuss specifications, delivery, OEM arrangements or local availability, contact us via WhatsApp or sales@jummos.com.
Contact Us / Request a Quote
Product information last reviewed by the Jummos Technical Team. For the most current specifications and configuration options, contact our sales team.





