SD-705 Silage Inoculant

• Faster fermentation – Three lactic acid bacteria produce abundant lactic, formic, and propionic acid to drop pH quickly and bring forage into the lactic acid phase early
• Lower dry matter loss – Total ensiling loss is normally around 20 percent; SD-705 can cut that loss by 8 to 15 percent
• Better aerobic stability – Lactobacillus buchneri produces acetic and propionic acid that suppress yeasts and molds at feed-out, reducing heating and spoilage
• Improved palatability – Aromatic fermentation compounds raise silage aroma, feed intake, and feed conversion for dairy cows
• High guaranteed potency – Factory total viable count of at least 1.1×10¹¹ CFU/g, quality-controlled in-house
• Third-party verified – Safety and microbial quality confirmed by independent Centre Testing International (CTI) testing
• Wide crop coverage – Suitable for corn silage, grass silage, and total mixed ration
• Flexible supply options – Foil pouch or tub packaging, glucose or maltodextrin carrier, and Arvelon or white-label branding for distributors building their own line

SD-705 uses the same three-strain lactic acid bacteria blend and the same 250 g net content in every version. What changes is how it is packed, which carrier holds the bacteria, and whose name goes on the label. Pick the combination that fits your market and your storage conditions.

All versions carry the same guaranteed total viable count of at least 1.1×10¹¹ CFU/g, the same dosage of 2.5 to 5 g per ton, and the same 24-month shelf life. Tell us your preferred combination when you request a quote, and we will confirm MOQ and lead time for that version.

Add 2.5 to 5 g of SD-705 per ton of fresh whole-plant corn. A single 250 g pack treats 50 to 100 tons of silage.

1. Dissolve one 250 g pack in a 15 L bucket of water and stir until there are no lumps.
2. Add the solution to a 300 L tank and spray evenly over the green forage.
3. Spray over roughly 1.5 to 2 hours per tank. One prepared tank treats 50 to 100 tons of silage.
4. Seal the cellar from the inside out: a transparent plastic sheet first, then a black-and-white film layer, and tire pressing on top.

Precautions: Use within a single session after opening to avoid moisture uptake that weakens performance. Stir and fully dissolve the product in water before use to prevent precipitate and uneven spraying.

• Improves silage effect and quality – Lactic acid bacteria ferment quickly to produce rich lactic, formic, and propionic acid, rapidly reducing pH
• Improves dry matter recovery – Fast acid production moves silage into lactic acid fermentation sooner, inhibiting spoilage bacteria and reducing dry matter loss
• Accelerates fermentation and lowers pH – Three lactic acid bacteria produce acid quickly and in volume, extending shelf life and preventing secondary fermentation
• Improves palatability and intake – Fresh, green, aromatic silage stimulates appetite and supports animal growth and development

Studies show that Pediococcus pentosaceus, Lactobacillus plantarum, Lactobacillus buchneri, and the finished SD-705 complex strain are all effective at inhibiting mold, with the best result coming from a balanced combination.

SD-705 has been tested by Centre Testing International (CTI), an independent third-party laboratory. In trials, corn silage treated with SD-705 saw pH drop rapidly from 5.4 to 3.7 within 30 days, confirming fast lactic acid bacteria activity and abundant production of lactic, formic, and propionic acid. After treatment, yeast and mold counts fell by 37 percent and 50 percent respectively, because rapid acidification brings forage into the lactic acid phase early and suppresses spoilage organisms.

The full CTI inspection results below show that SD-705 meets the limit requirements for safety and microbial quality, including heavy metals, pathogens, and guaranteed lactic acid bacteria count.

Buying direct from the manufacturer gives distributors and large producers control over cost, quality, and supply. As the factory behind SD-705, Tsingtao Jummos offers advantages that resellers cannot match.

• Direct factory pricing – No middleman markup, which protects your margin on bulk and recurring orders
• Guaranteed potency – Every batch is produced and quality-controlled in-house to at least 1.1×10¹¹ CFU/g at the factory
• Third-party verified – Safety and microbial quality confirmed by independent CTI testing
• OEM and private label – Custom formulation, packaging, and branding for distributors building their own line
• Bulk supply and export experience – We supply silage inoculant in volume and ship internationally. Contact us for current MOQ and freight options

SD-705 pairs naturally with our forage and feed machinery range. Many buyers combine it with our balers, baler wrappers, and TMR mixers for a complete ensiling and feeding workflow.

Tsingtao Jummos Agricultural Technology Co., Ltd. supports OEM and private-label supply for SD-705 silage inoculant. You can choose foil pouch or tub packaging, a glucose or maltodextrin carrier, and either the Arvelon brand or a white label printed with your own brand and regional registration details. As the manufacturer, we supply direct in bulk with export experience and ship internationally. To discuss specifications, OEM arrangements, MOQ, or freight, contact us via WhatsApp or sales@jummos.com.