Buying a feed mixer wagon must be selective and careful. The goal is that you can get a good machine, but the price is still affordable. After the agenda is successful, the use and maintenance of the machine is the next messenger that should not go unnoticed. No matter how good and expensive a mixer machine you have, it will all be in vain when you are careless in its use and are lazy to take care of the machine with care. In many cases, damage to the feed mixer is caused by improper use and neglect in maintenance.
At first glance, the feed mixer wagon has been widely used by large and medium-sized livestock entrepreneurs. The use of this machine has the potential to encourage effective and efficient performance, especially in terms of feeding. Even so, compounding the total mixed ratio using a mixer must be accompanied by a nutritionist. It is also important to check the quality of the feed after it is mixed using a machine. In this way, it is hoped that there will be a significant and sustainable increase in meat and milk production.
Entrepreneurs in the livestock sector are very familiar with this one mixer machine. They even continue to search to find the most suitable engine and support their livestock business. Not a few of them still need information related to the feed mixer wagon care guide.
Contents
Some Things to Pay Attention to
The maintenance of the feed mixer wagon must be done carefully by paying attention to many vital components. Among them are:
– Plow Blade
These components are usually made of metal pieces that are fixed with bolts and screws, metal strips on the back of the screw. Make sure these components do not wear out so that their performance is always optimal. Although this is only a thin knife that doesn’t seem very important, it has a strategic role in the process of cutting feed ingredients. Regular inspections are mandatory.
– Stirring Knife
The next component that should not be spared from maintenance is the stirring blade. Always make sure it’s sharp because its job is to cut a lot of hay and lint quickly and effectively. Also, check the bolt heads for wear or looseness, as your negligence may cause the blade to fall out of place when the machine is operating. In some cases, the knife must be sharpened, replaced, or swapped, for example, after a year of use. If you can’t do it yourself, don’t hesitate to ask a professional for help.
– Other Components
The engine drive chain should remain tight (not loose) and always check for oil leaks. You also have to make sure to always change the oil after 2.000 hours of use or according to the instructions given by the supplier. Another component that should not go unnoticed is the roll rod. The condition of this device can be depleted after using the feed mixer wagon for a while. If the coil rod is very thin, even breaking, it will jam and cause damage to the auger.
When to Ask for Help from an Engine Repair and Maintenance Company?
When you find problems with engine performance, as mentioned above, you can immediately go to a repair shop or service company that specializes in the repair and maintenance of feed mixer wagons. But if you are sure to handle it yourself, do it with utmost care so as not to cause damage to other components.
Most importantly, you should do regular cleaning and maintenance. The goal is not only for the health and cleanliness of the feed but also can detect engine performance anomalies and even find damage as early as possible. You can also claim a warranty from the supplier where you bought the feed mixer if there is a machine or component damage before the warranty period expires.
Establish Good Cooperation with Trusted Suppliers
One of the characteristics of a good feed mixer wagon is that it has strong and durable components. If you are not skilled at detecting these characteristics, make sure you buy a feed mixer machine from a credible, experienced supplier and has a good reputation for many years. Machine maintenance and cleaning will be easier when you have a high-quality machine.
Jummos is one of the most recommended companies when you want to have a good and affordable feed mixer wagon. With us, you can get machine recommendations and free consultations to ensure you get the right feed mixer, both in terms of price and quality. Let’s immediately consult to find a variety of solutions that are solutions for the progress of your livestock business. Please access www.jummos.com for more information.