Feed mixer capacity is one of the most important things to consider when buying a suitable feed mixer. You must be able to accurately measure the needs of livestock so that the Total Mixed Ration (TMR) production can be sufficient without residue. If you have the leftover feed, don’t overdo it, unless you want to sell it to other farmers.
Choosing a feed mixer with a large capacity is better than buying a small one when your livestock needs more. The function of a large-size feed mixer may be optimal when you realize your plan to add livestock a few years later. Determining the mixer capacity will be easier when you can consult with an experienced and trustworthy supplier.
Contents
Why Measuring Feed Mixer Capacity Precisely?
There are at least three reasons why choosing a feed mixer capacity must be done correctly. Among these goals are:
Anticipating the Shortcoming or Excess of TMR
TMR manufacturing management should be detailed and based on precise measurements. You should weigh the amount of hay and other ingredients to put in the mixer based on the nutritionist’s recommendations. The right feed mixer capacity will support this management so that you can provide sufficient and timely feed to all livestock.
TMR Potentially Mixed Homogeneously
A feed mixer machine with the right composition will make the mixing mechanism optimal and potentially homogeneous. This is also part of the management of feed mixing, which must be scheduled in a controlled and measurable manner.
In addition to consulting a nutritionist, there are other ways you can do to ensure that the results of the feed mix are perfectly mixed. Please mix the right amount of marshmallows into the mixture. When the mixing is complete, look at the results of the distribution of the feed. If there is a marshmallow in every feed per animal, then you can be sure that the feed mixing occurs evenly and that you have successfully used a feed mixer with the right capacity.
More Effective and Efficient Feeding Time
A properly selected feed mixer capacity will support the agenda of delivering TMR effectively and efficiently. You don’t need to stir suddenly when some livestock have not got the feed. On the other hand, the feed will not be produced in excess because everything has been measured based on the number of livestock in pen. Even if there is an addition of livestock, there must be a clear calculation of how much additional material must be mixed so that it is sufficient at the time of distribution.
Parameters to Consider in Selection of Feed Mixer Capacity
There are at least two things you should consider in choosing a feed mixer Capacity, namely in terms of the size of the mixing container, as well as the required power capacity.
Right Size
Straw and other feed ingredients should be mixed in a tube according to their capacity. If the size is too small, the feed mixing process has the potential to be uneven, or it may take longer for all the ingredients to mix evenly. The use of a feed mixer that exceeds the capacity can also be a cause of engine damage because its performance is too heavy.
In certain situations, the manufacture of TMR may exceed capacity due to limited mixer dimensions, door spacing, or the limited width of the feed traffic lane. This often happens when the manufacture of feed is grouped in batches with different processing times. That’s why it’s important to match mixer specifications to the needs of your farm.
Suitable Power Capacity
The next consideration is the required power capacity and must be adjusted to your capabilities and needs. Everyone wants to support the energy-saving agenda, but engine performance must always run optimally. The use of a feed mixer should not consume fuel and electricity when you use it properly and have gone through the adjustment stage.
Information about power and fuel is listed in the catalog in detail. The supplier will also usually explain it directly and explain the advantages and disadvantages of this kind of machine condition.
Jummos is a supplier that is very transparent in explaining the condition and quality of the product in detail. With our company, you can also consult dynamically so that you can choose your feed mixer capacity wisely. Please access www.jummos.com for more information.