Cow Dung Vacuum Cleaner Truck

• Auger collection, not chain – The auger design avoids the chain wear that shortens service life in a wet, abrasive barn environment
• One machine for every manure condition – Handles water manure, thin manure, thick manure, dry manure, and frozen manure, including material mixed with sand, straw, or rice husk bedding
• Collect, carry, and discharge in one cycle – Removes the need for a separate loader and haul vehicle, cutting both equipment and labor cost
• Self-unloading tipper with automatic gate door – Empties the box quickly with minimal manual effort and reduced spillage
• Automatic lubrication system – Fitted to every model to cut daily maintenance time
• Rear or four-wheel steering – Keeps the machine responsive in barns, alleys, and tight yard layouts, so operators avoid reversing along the run
• Cold-weather package on 2, 3, and 4 Series – Sealed cab, air conditioning, warm air, diesel heater, heated mirrors, and manure box heating support year-round operation
• Five capacities to match herd size – From a 5 m³ family-farm machine to a 12 m³ four-wheel-drive flagship
• OEM and customization available – Color, capacity, and span can be tailored, with OEM supply supported for distributors and brand partners

The 9QF-ZM1-5 is the entry point to the range, simple to run and easy to maintain. It carries 5 m³ per load, runs a Yuchai 4-cylinder rated at 77.3 kW / 105 hp, and clears a working span of 2.8 m. It is aimed at family farms and small dairy herds.

The 9QF-ZM1-6 is more box volume and higher road speed than the 1-5, on the same simple platform. It carries 6 m³ per load, runs a Yuchai 4-cylinder rated at 77.3 kW / 105 hp, and clears a working span of 2.8 m. It is aimed at growing family farms and small commercial dairies.

The 9QF-ZM2-8 is the first model with a sealed cab and the full climate and camera package. It carries 8 m³ per load, runs a Cummins 4-cylinder rated at 97 kW / 130 hp, and clears a working span of Telescopic 3 to 4 m. It is aimed at mid-size commercial dairy and beef operations.

The 9QF-ZM3-10 is a 6-cylinder engine and a wide telescopic span for high daily volume. It carries 10 m³ per load, runs a Cummins 6-cylinder rated at 132 kW / 180 hp, and clears a working span of Telescopic 3 to 4.6 m. It is aimed at large commercial dairy farms and feedlots.

The 9QF-ZM4-12 is four-wheel drive and four-wheel synchronous steering for the tightest large yards. It carries 12 m³ per load, runs a Cummins 6-cylinder rated at 132 kW / 180 hp, and clears a working span of Telescopic 3 to 4.6 m. It is aimed at very large dairy operations and contractor fleets.

The guiding rule is to size for what you actually clean each day rather than buying the largest box available. An oversized machine costs more to purchase, burns more fuel, and is less agile inside the barn.

Use these figures as a starting point for the calculation:

• Dairy cows, cleaning twice per day – roughly 23 head produce 1 m³ of manure per cleaning cycle
• Dairy cows, cleaning three times per day – roughly 34 head produce 1 m³ per cleaning cycle
• Growing and fattening beef cattle – roughly 28 head produce 1 m³ per day

Multiply your herd size against the figure that matches your routine, then match the result to a box capacity in the comparison table above. Also weigh three practical constraints: the width of your feed alleys against the working span, the height of your gateways and doorways against the overall machine height, and whether the machine can turn at the end of a run without reversing. Reversing along a run is the single biggest drag on cleaning efficiency and the main reason four-wheel steering is worth the cost on larger sites.

• Dairy farms – Keeps cow barns, feed alleys, and walkways clean to support herd health and udder hygiene
• Beef and feedlot operations – Clears manure across large pens and holding areas with fewer passes
• Family and smallholder farms – The 1 Series gives a compact, affordable route into mechanised manure handling
• Large commercial livestock farms – The 3 and 4 Series handle high daily volumes with 180 hp engines and telescopic spans up to 4.6 m
• Contractors and service providers – Four-wheel drive and four-wheel steering on the 4-12 suit operators moving between multiple sites
• Cold-climate operations – Manure box heating and diesel heaters on the 2, 3, and 4 Series keep the machine working through winter
• Manure transport and disposal – Collects and moves waste to storage, lagoons, or spreading points without a separate haul vehicle

• Check alley, gateway, and doorway clearances against the overall dimensions of your chosen model before the machine arrives on site
• Match the working span to your feed alley width so the machine clears the full floor in a single pass
• Observe the manure box capacity and maximum load figures when planning routes and ground conditions
• Use the self-unloading tipper on stable, level ground, and keep clear of the body while it is raised
• Allow for the turning radius when planning turning points, and confirm the figure for your model against your yard layout with the sales team
• Check that the automatic lubrication system is filled and functioning as part of the daily pre-start routine
• In cold climates, run the manure box heating and diesel heater before starting work to stop material freezing to the box walls
• Carry out routine inspection of the engine, hydraulic system, augers, and tailgate to maintain performance and extend service life

Jummos supports OEM supply and customization across the full Cow Dung Vacuum Cleaner Truck range. Color, manure box capacity, and working span can be adapted to match your operation, distribution brand, or regional requirements. As a made-in-China agricultural machinery manufacturer focused on high cost performance and dependable service, Jummos works directly with farms, contractors, and distributors worldwide. To discuss specifications, OEM arrangements, or local availability, contact us via WhatsApp or sales@jummos.com.